Felucca – ODeath Wavetable Mod
20 waveforms • 4-voice wavetable synthesis • Felucca WaveTable v0.7.5
Based on Felucca by Leo Kuroshita (@kurogedelic), Hügelton Instruments. The USB MIDI installer and firmware package handling are also their original work, reused under GPL-3.0-only.
Install Felucca WaveTable v0.7.5
Custom firmware can fail and leave your FM-1 in update mode. Have a verified recovery method ready. Do not disconnect USB while writing. Use at your own risk.
Chrome or Edge on desktop is required for WebMIDI SysEx. Connect the FM-1 directly by a USB data cable, and close other MIDI apps.
The firmware is loaded from this project's GitHub Pages site. It is checked locally against the exact published SHA-256 before installation.
Checking bundled firmware…
Preparing…
Technical log
FM-1 Recovery & Rescue
If a firmware update is interrupted or your FM-1 becomes stuck in update mode, do not assume that retrying the browser installer will fix every problem. Check the recovery tools and instructions below before attempting further flashes.
- The Firmware Hub — USB Rescue / Rescue a stuck FM-1: Consult The Firmware Hub for its FM-1 USB rescue guidance and recovery resources when the device is stuck or a firmware update fails.
- M-VAVE FM-1 Unbricker (Quixotic7): A community hardware-assisted recovery project for an FM-1 that cannot be restored through the normal update process. Follow its repository instructions carefully; additional hardware may be required.
- FM-1 Transporter: Another FM-1 firmware transfer and recovery-related resource.
These are external community resources, not automatic recovery functions of this installer. Recovery is not guaranteed. Consult the original Felucca documentation as well.